Our Certificates

Strengthening Masonry Walls with Basalt Mesh
Strengthening Masonry Walls with Basalt Mesh


Masonry structures are buildings whose main load-bearing elements are walls constructed with brittle materials with low ductility such as natural stone, sandstone and brick; where workmanship plays an important role in construction, and where wall geometry and the specific properties of the materials used have a significant share in resistance to vertical and horizontal earthquake loads. 

Due to their high fire and frost resistance, the possibility of utilizing local resources, ease and speed of workmanship, and durability, masonry structures have been frequently preferred both in our country and on a global scale.

According to the building census carried out by DİE in 2000, buildings with a masonry load-bearing system constitute 51% of the building stock in Türkiye. 

Figure 1: Beyoğlu Historic Building Basalt Mesh (reinforcement mesh) Restoration Project Images – 2023

Despite their favorable properties, the walls, which are the load-bearing elements of masonry structures, lack the deformation capacity required to withstand the tensile stresses arising from seismic forces. 

In addition to the rarely occurring effects of strong earthquakes, reasons such as deterioration over time, the weakness of the mortar in the joints, and use of the structure contrary to its intended service function generally cause walls to be highly inadequate in terms of lateral load-bearing capacity and ductility. 

     

Figure 2: Haliç Tersanesi Basalt MESH Strengthening Project Images – 2022

Türkiye has many monumental structures built during the Roman, Byzantine and Ottoman periods. Thanks to strengthening techniques, it is possible to ensure the continuity of the cultural heritage formed by existing masonry structures and to prevent potential material and non-material losses.

Strengthening is the improvement of the resistance and deformation properties of all or some elements of the load-bearing system, whether damaged or not. 

Disadvantages of conventional strengthening methods such as shotcrete, grout injection, and prestressing with steel ties—such as causing a significant increase in mass, limited application space, time-consuming implementation, and lack of economic efficiency—have led to the need for new strengthening methods.

Since the 1980s, the frequency of use of textile materials such as Fiber Reinforced Polymer and similar products in reinforced concrete or masonry structures and elements for strengthening purposes has increased significantly, especially in recent years.   

Polymer materials such as epoxy are used to bond fiber polymer textile materials to the surfaces of structural elements.  With this method, called fiber polymer application (FRP, Fiber Reinforced Polymer), it has been observed that the shear behavior and deformation capacity and ability of walls under cyclic and monotonic loading are improved. 

However, the FRP strengthening technique also has unfavorable characteristics, such as application difficulties on damp surfaces and at low temperatures, the high cost of epoxy, and lack of vapor permeability.  These deficiencies can be eliminated by preferring inorganic materials (new and traditional mortars such as cement, lime, etc.) instead of organic binders when bonding the textile material to the surface.

     

Figure 2: Haliç Tersanesi Basalt MESH Strengthening Project Images – 2022

Within this context, all masonry walls are effectively strengthened with mortars reinforced with basalt mesh. With this method, the wall cross-sections and mass do not change. The product is used together with traditional hydraulic mortars such as cement or lime. 

The basalt mesh system withstands temperatures up to 1000 degrees and is absolutely unaffected by rusty-corrosive and salty-alkaline environments.  

In practice, the efficiency of the basalt mesh technique is greatly increased by using special basalt anchors at wall ends and corners. Basalt anchors are applied together with the mortar used in basalt mesh applications. 

 

On the other hand, in order to efficiently increase the shear capacity of walls, hardened prefabricated FRP (composite) bars or stainless steel rods should be used as anchors.     

The effectiveness of the reinforcement system proposed for masonry walls and summarized above has been proven in many university research projects in our country and around the world.

Basalt Mesh – Areas of Use for the Strengthening Mesh

 

Address:  Ziya Gökalp Mah. Süleyman Demirel Bulvarı Mall Of İstanbul The Office No:7 E Floor:17 Apartment No:136
PC:34490, Başaksehir - İstanbul, Tel: 0212 982 0215
e-mail: info@karbontech.com.tr   website: www.karbontech.com.tr

Related content

WhatsAppSupport Line